Setting up the rib jig and building gussets

 Laying out the cap-strip blocks.

 Finished laying them out, now time to nail them down.

Building two rib jigs on one piece of plywood.

The rib jig is ready, now we all need is gussets.

 First we cut the gussets out of the plywood then we sand them down.

Finished gussets.

 All the gussets we've made so far, enough for 12 ribs.

 All the wood for the spares and trailing edge.

 Cap-strips for the ribs, sitting ready to be made into ribs.

 Cap-strip steaming rib jigs for the top and bottom parts of the rib.